In the face of a large variety of kitchen cabinets on the market, many consumers are blindfolded and unable to start. But in fact, figure out the following ten questions, no need to worry about purchasing cabinets!
1. Ask the thickness of the cabinet board:
The cost of 18 mm thick plate is 7% higher than that of 16 mm thick plate. The life of cabinets made of 18 mm thick plate can be more than doubled.
2. ask if there is a separate cabinet:
The entire set of cabinets will affect the fastness. When buying the overall cabinet, ask clearly. The difference between the service life and stability of the two is 2-3 times, and the cost is 5%.
3. ask whether the artificial stone is installed cleanly:
If the cabinet manufacturer you choose is dust-polished, be sure to install a countertop before the floor and paint enter the floor, otherwise you will have to spend money for secondary cleaning.
4. Ask the aluminum foil installation method of the sink cabinet:
Whether the sink cabinet is pressed at one time or glued during installation. The sealing performance of a single pressing is more complete, and water and moisture are not easy to penetrate.
5. I want to ask if you can provide a test report:
Some manufacturers can only provide raw material inspection reports, but the environmental protection of raw materials does not equal the environmental protection of finished products. Only qualified products can prove that their products are qualified.
6. ask if it is anti-cockroach silent edgebanding:
Using an anti-cockroach silent edge-sealing cabinet, the impact force can be relieved when the door is closed, eliminating noise, preventing cockroaches and other insects from entering, and the cost without anti-cockroach edge is 3% lower.
7. Ask the composition of artificial stone:
Suitable materials for kitchen countertops include fire board, artificial stone, natural marble, stainless steel, etc. Among them, the performance-price ratio of artificial stone countertops is the best.
8. ask the assembly method:
Generally small factories or hand-made on-site can only be connected with screws rivets or glue.
9.How to seal the back panel:
In order to save costs, some manufacturers cut corners and cut back materials. They only make single-sided seals on the back panel, and the invisible side is bare.
10.Ask the warranty period:
Don’t just care about the price and style of the product, whether it can provide high-quality after-sales service is a manifestation of the strength of the manufacturer.
