1.Thickness of cabinet board
At present, there are 16mm, 18mm and other thickness specifications on the market, and the cost of different thickness varies greatly. For this only, the cost of 18mm is 7% higher than that of 16mm, and the service life of cabinets made of 18mm can be prolonged by more than one time, so as to ensure that the door panel is not deformed and the table top is not cracked. When consumers look at the samples, they must carefully understand the composition of the materials and be aware of them.
2.Independent cabinet or not
The whole group of continuous cabinets will affect the fastness, so consumers should ask clearly when purchasing the whole cabinet. The difference between the service life and stability of the two cabinets is 2-3 times, and the cost is 5%. Consumers can identify by packaging and installed cabinet. If the independent cabinet is assembled in a single cabinet, each cabinet should have an independent packaging; consumers can also observe it before the cabinet is installed on the table.
3.Anti cockroach mute edge sealing
The cabinet body with anti cockroach silent edge sealing is used. When the cabinet door is closed, the impact force can be alleviated, the noise can be eliminated, and the cockroach and other insects can be prevented from entering. The cost difference of anti cockroach edge sealing is 3%. Also check whether the platform panel, door panel, box body, sealing strip and anti-collision strip are processed by machine membrane pressure, and whether the front and back sides are pressed together. The sealing strip is not tightly sealed, which will cause oil smoke, dust and insects to enter.
4.Composition of artificial stone
Suitable for kitchen countertop materials, including fire-proof board, artificial stone, natural marble, granite, stainless steel, etc., among which the performance price of artificial stone countertop is the best. Cheap tabletop calcium carbonate is high in composition and easy to crack.
At present, composite acrylic and pure acrylic are widely used in the market. In general, the best proportion of acrylic component in compound acrylic is about 20%.
5.Whether the artificial stone is dust-free
In the past, many manufacturers will polish the artificial stone on the installation site, causing environmental pollution in the living room, which is unexpected for consumers. Now some leading cabinet manufacturers have realized this. If the cabinet manufacturer you choose is dusted and polished, you must choose to install the countertop before the floor and paint enter the site, otherwise you will have to pay for the second cleaning.
6.test report be provided
Cabinets are also furniture products, the state has a clear provision to issue a finished product test report and express the formaldehyde content. Some manufacturers can only provide raw material inspection reports, but raw material environmental protection is not equal to finished product environmental protection, only the finished product is qualified can prove its product is qualified. Therefore, when purchasing, consumers can ask for it from the merchants or record the number of the quality inspection report presented by the merchants and call the quality inspection department to check the authenticity.
7.Assembly mode
In general, small factories or hand-made on-site can only be connected with screws, rivets or adhesives.
Adopt the latest third generation of box bar tenon structure plus fixed parts and quick assembling parts, more effectively ensure the firmness and bearing capacity of the box, and use less adhesive, more environmentally friendly.
8.How to seal the back plate
In order to save costs, some manufacturers cut corners and seal the back panel only on one side, and the invisible side is exposed. The back plate after single-sided sealing is easy to get wet and moldy, and it is also easy to release formaldehyde, causing pollution, so it must be double-sided sealed.
9.Installation method of aluminum foil for sink cabinet
Is the sink cabinet pressed at one time or glued during installation.
The sealing performance of one-time pressing is more intact, water and moisture are not easy to penetrate, and the cabinet body is more effectively protected to extend the service life of the cabinet.
10.Defects Liability Period
Don’t only care about the price and style of the product. It is the strength of the manufacturer to provide high-quality after-sales service. For example, the warranty period is one year for some manufacturers, two years for some manufacturers and five years for others. The manufacturers who dare to protect for five years will surely have higher requirements in materials, manufacturing and other links, which is also the most affordable for consumers. Many small factories are very cheap, but the warranty is short or there is no warranty. Once there is a problem, it is difficult to get a reasonable solution, so consumers must ask about product warranty when ordering cabinets.
