modular wooden style modern bathroom vanity
- Place of Origin: Guangdong, China (Mainland)
- Brand Name: PRODECO
- Model Number: PDV-25
- Style: Modern
- Type: Vanity Combo
- Installation Type: Floor Mounted, Wall Mounted
- Carcase Material: MDF, Melamine Board, Particleboard, Plywood, Other
- Door Material: HPL / HPDL, MDF, Melamine Board, Particleboard, Plywood, Solid Wood, Stainless Steel
- Door Panel Surface Treatment: Acrylic, Lacquer, PVC Membrane, Solid Wood, Melamine
-
Product Overview
The PDV-25 is a modular wooden vanity cabinet that we build to your drawings rather than pull from a fixed catalogue. As a custom bathroom vanity manufacturer, we make the cabinet, countertop, mirror and basin as one set, so widths, depths and working heights follow the room instead of the room being adjusted around a stock unit. Every order starts with a plan: the base cabinet, wall cabinet, tall cabinet and shelf are laid out on it, and the basin, plumbing and any mirror lighting position are marked before a single panel is cut.
In daily use this is a modern wooden bathroom vanity with soft-close doors, a ceramic basin and a quartz, man-made stone or ceramic top. Handles and knobs are aluminium, the interior stays dry enough for towels and everyday storage, and because the modules are separate units one run can pair a closed base cabinet under the basin with a mirrored wall cabinet and, where there is space, a tall cabinet for linen.
Sets like this come off the same lines as our kitchen and wardrobe cabinets. As a modular bathroom vanity supplier we keep board, finish and hardware consistent across a whole-house package, so a bathroom specified alongside a kitchen comes out in the same colour and sheen rather than a near match. Send a dimensioned plan and we will tell you which modules cover the space.
-
Configuration & Specifications
– Carcase boards. Carcasses are built in 18 mm melamine board, plywood, particleboard or MDF, depending on the specification. A modular wooden vanity cabinet uses the same board through the base, wall and tall units, so the whole set responds the same way to a humid room. – Door panels. Doors are MDF panels at the same 18 mm thickness, finished in two-pack high-gloss lacquer as standard. Where a wooden bathroom vanity cabinet has to match a different scheme, the same panel can be faced in acrylic, PVC membrane, melamine, wood veneer, HPL/HPDL or solid wood. – Back panels. Each unit is closed with a 5 mm MDF or 16 mm MFC back panel, which protects stored items from the wall surface and gives the box its rigidity once the cabinet is fixed. – Runners and handles. Where drawers are specified, runners come from the same hardware brand as the hinges, so a project holds one spare kit rather than two. Handles and knobs are aluminium in the profile you choose. – Countertop, basin and tap. Tops are quartz stone, man-made stone or ceramic, cut for a ceramic basin; taps are available in stainless steel, copper or zinc alloy. – Made in our Guangdong workshop. Panels are cut, edged and finished in-house before packing, which is why, as a modular bathroom vanity supplier, we treat a custom width or an unusual module as a change to the drawing rather than a new product. – Colour consistency. Doors, back panels and shelves in one order are finished together, so colour and sheen stay matched across the base, wall and tall units of a single set. – Spares. Ask your sales contact about adding spare hinges, dampers and handles to the order, so a multi-room project has matching replacements on hand later.
Property Specification Model PDV-25 Type Vanity combo — mirror, countertop, basin and faucet included Installation Floor mounted or wall mounted Carcase material MDF, melamine board, particleboard or plywood Door material HPL / HPDL, MDF, melamine board, particleboard, plywood, solid wood or stainless steel Door panel finish Two-pack high-gloss lacquer Back panel MDF or MFC Hinges and dampers Blum or DTC Countertop Quartz stone, man-made stone or ceramic Material Environment friendly E0/E1 grade Colour Customized colour Size Customized size Advantage Easy clean, durable, trendy Packing Assembled or Knock down Packing
-
Mounting and Installation
- Check the drawing against the room. Measure the finished wall, the floor line and the positions of waste, water and any electrical points before unpacking. Small site differences are normal; catching them now is far easier than adjusting a fixed cabinet afterwards.
- Decide the mounting method before production, not on site. Floor-mounted bases stand on their own and tolerate a slightly uneven floor; wall-mounted units leave the floor clear for cleaning but need a sound wall or proper blocking behind the fixing points.
- Set out the services first. Mark where the waste, the water and any lit-mirror supply will land, and check that each one falls inside the cabinet rather than behind a drawer box.
- Hold one height across a multi-room job. On a wholesale wooden bathroom vanity programme — a hotel floor, serviced apartments or a repeat contract order — fix a single basin rim height and a single mirror height and use them in every room, so tiling, pipework and spare parts stay interchangeable.
- Fix the units level. Set the base cabinet in place, pack it until the top is level in both directions, then fix it to the wall. Hang the modular wooden vanity cabinet on its back panel, pack and fix it the same way, and check the gaps between neighbouring modules before final tightening.
- Seal the basin and the top. Bed the basin on a continuous bead of silicone, seal where the countertop meets the wall, and wipe the excess away before it skins. On a wooden bathroom vanity cabinet keep silicone and solvent off the lacquered faces — those are the parts that show.
- Hang the doors and finish. Fit doors and drawer fronts last, set the gaps along the run by eye, adjust the hinges until each door closes softly, then fit handles, shelf and mirror and wipe the whole unit down.
-
Where It Is Used
- Hotel bathrooms. A hotel bathroom vanity set is usually drawn once and repeated across identical rooms, so the base cabinet, mirror and shelf positions stay the same from floor to floor. Wall-mounted bases leave the floor clear for housekeeping, and a repeated drawing keeps replacement parts simple.
- Offices, gyms and restaurants. In a commercial bathroom vanity the doors take far more opens and closes than in a home, so soft-close hinges and aluminium handles matter more than decorative detail. Keep the finish simple and the cleaning routine short.
- Family and master bathrooms. These runs usually mix closed storage under the basin with a wall cabinet and, where the room allows, a tall cabinet for linen — all cut to the same wall measurement.
- Serviced apartments and rentals. Compact wall-mounted units suit small bathrooms and keep the floor looking larger, while one consistent specification across a block makes later repairs straightforward.
- Showrooms and stock. Buyers building a wholesale wooden bathroom vanity range often order one finished set for display and repeat the same specification for stock, so what a customer sees on the floor is what ships.
- Whole-house fit-outs. When the bathroom is part of a kitchen and wardrobe package, the same board and finish runs through all three rooms and the scheme reads as one design rather than three separate purchases.
-
Standard Module Sizes
Module Dimension (mm) Wall cabinet — width Customized to your layout Wall cabinet — depth 150 Wall cabinet — height 720 Base cabinet — width 500 Base cabinet — depth 450 Base cabinet — height Confirmed on your drawing Tall cabinet — width 350 Tall cabinet — height 2000 Shelf 200
-
Other Vanities in the Range
- Wall cabinet and mirror-led sets. Where storage above the basin matters more than a large base unit, the mirror cabinet and wall cabinet carry the design and the base stays slim.
- MDF and PVC designs. A more economical route for volume work where the front is specified as MDF or PVC membrane rather than lacquer.
- Compact PVC units. A small-format cabinet for tight washrooms, cloakrooms and back-of-house facilities where floor space is the constraint.
- Shaker-style fronts. For interiors where the design language is painted Shaker rather than high gloss, with the same board build behind the door.
- Wall cabinet plus mirror cabinet combinations. A two-part arrangement that puts a mirrored cabinet over the basin and extra wall storage beside it.
- Hotel sets with a matching wall cabinet. A repeated-room format built around the same drawing, with the wall unit included so every room matches.
- Floating wood-grain vanities. A wall-hung unit with a textured wood-grain face for interiors that want warmth instead of gloss.
- Simple PVC bathroom cabinets. A straightforward, easy-clean cabinet for rental, student and light commercial work.
-
Care and Maintenance
A modern wooden bathroom vanity needs very little beyond routine wiping. Use a soft, damp cloth with a little mild soap, then dry the surface rather than letting water stand on it. Abrasive pads, scouring cream and solvents dull a high-gloss face quickly and are not needed — most marks lift with warm water.
In a commercial bathroom vanity the same routine simply runs several times a day, so keep the products basic and the cloths clean. Check hinges and handles monthly: a soft-close door that has started to drop usually needs a small adjustment on the hinge screw rather than a replacement, and a loose handle is a matter of tightening the fixing from inside the door.
Renew the silicone where the top meets the wall and around the basin when it starts to lift or discolour, and keep the room ventilated so condensation dries off the doors between use. If a door is knocked out of line, adjust the hinge before touching the cabinet fixings — a properly secured unit rarely moves.
Ordering and Delivery
- Send the room information. A dimensioned sketch, a floor plan or a full drawing set is enough to start.
- Agree one specification sheet. Finish, colour, countertop, basin, hinge brand and packing method are written onto a single sheet before production.
- Set quantity and packing. Our production lines handle everything from a single set to two containers a week, and packing is agreed at the same time. Knock-down panels are labelled by module so an installer can identify each piece on site; assembled units arrive ready to set in place. For a wholesale wooden bathroom vanity order, tell us how the goods will be stored so the packing suits it.
- Plan multi-room deliveries. Where a hotel bathroom vanity set spans several floors or phases, send the room sequence with the order so packing and labelling can follow the installation plan rather than being opened all at once.
- Confirm the production slot. Quoted lead time is typically around 15 days; confirm the current schedule for your finish and volume with your sales contact before you commit to a site date.
- Approve the colour and finish. Ask your sales contact about sample availability for the colour and door finish you have chosen, and check the panel against the room lighting before the full run goes ahead.
- Confirm the terms on the order. Payment terms, delivery arrangements and the final specification are set out on the order confirmation — read them against your own programme before signing off.
-
Scale & Supply Capability
We are a China-based whole-house cabinet manufacturer supplying wholesalers, trade buyers and project buyers. Our ISO9001-certified factory produces to buyers’ own drawings, sizes and finishes, and we support OEM and private-label programmes for customers building their own catalogue. Every order is quoted and scheduled around your volumes and delivery dates, with packing and export documents handled on our side. Send your quantities, sizes and destination port, and we will come back with the production schedule and shipping plan.
-
FAQ
What is included with this vanity?
Each modern wooden bathroom vanity is supplied as a set: the cabinet modules, the countertop, a ceramic basin, a mirror and a faucet. Basin and tap styles vary by design, so confirm the exact combination on your specification sheet before the order is released.
Can the vanity be made to my own measurements?
Yes. As a custom bathroom vanity manufacturer we build from your drawings, so width, depth, height and the position of the basin and plumbing cut-outs all follow the room. Send a dimensioned plan and we will confirm which module sizes cover the space and where a custom width is needed.
Which hinges and runners are fitted?
Every wooden bathroom vanity cabinet is fitted with Blum or DTC hinges and dampers, and runners from the same brand where drawers are specified. Tell us which brand you want written onto the order; both are widely supported, so replacement parts are straightforward to source in most markets.
Can it be floor mounted or wall mounted?
Both are available on this model. The mounting method is fixed on the drawing before production, because a wall-mounted cabinet is built with a different back and fixing detail from a floor-standing one. Tell us which you need when you send the plan.
Is this suitable for hotel projects?
Yes — a hotel bathroom vanity set is one of the most common ways this model is ordered, usually as a single drawing repeated across identical rooms. Wall cabinets, mirror cabinets and tall units can be added to that drawing so every room matches and later replacements are simple.
Will the finish cope with a commercial washroom?
For a commercial bathroom vanity the practical answer is the finish that wipes clean most easily, and both the lacquer and melamine faces are cleaned with a damp cloth and mild soap. Aluminium handles and soft-close hinges are chosen for the daily use these rooms get, and both are adjustable rather than needing replacement.
Can the colour match my kitchen or wardrobe?
It can. As a modular bathroom vanity supplier we finish bathroom units on the same lines as kitchen and wardrobe cabinets, so a vanity can share a colour and sheen with the rest of a whole-house package. Confirm the final colour against a physical panel before production.
Can I add a tall cabinet or shelf later?
Yes. Because each module is drawn to the same wall measurement, a tall cabinet or shelf can be added on a later order and produced to the same board and finish. Keep the original drawing reference so the dimensions and colour stay matched.
- Include Basin: Yes
- Include Countertop: Yes
- Include Mirror: Yes
- Include Faucet: Yes
- Advantage: Easy clean, Durable, Trendy
- Item: Bathroom vanity
- Door panel: 18mm MDF/Plywood/Particle board
- Carcass: 18mm Melamine Board/Plywood/Particle Board
- Back panel: 5mm MDF/18mm MFC
- Countertop: Quartz stone/man-made stone/ceramic
- Hinge: Blum/DTC
- Handles and knobs: Aluminium
- Sink(optional): ceramic
| PRODUCT NAME | Size(mm) | Door panel
finishes |
Carcass material | Back panel | Hinge | Drawer runer | Sink | Tap | ||
| W | D | H | ||||||||
| WALL CABINET | Customized | 150 | 720 | Lacquer/Wood
veneer/Melamine PVC/ Acrylic |
16mm/18mm Plywood, MFC, MDF, with Melamine finishing | 5mm MDF /18mm MFC | Blum / DTC | / | / | / |
| BASE CABINET | 500 | 450 | Lacquer/Wood
veneer/Melamine PVC/ Acrylic |
16mm/18mm Plywood, MFC, MDF, with Melamine finishing | 5mm MDF /16mm MFC | Blum / DTC | Blum / DTC | ceramic/
man-made stone/quartz stone |
stainles steel/copper/zinc alloy | |
| TALL CABINET | 350 | 2000 | Lacquer/Wood
veneer/Melamine PVC/ Acrylic |
16mm/18mm Plywood, MFC, MDF, with Melamine finishing | 5mm MDF /16mm MFC | Blum / DTC | Blum DTC | / | / | |
| Shelf | 200 | Lacquer/Wood
veneer/Melamine PVC/ Acrylic |
16mm/18mm Plywood, MFC, MDF, with Melamine finishing | / | / | / | / | / | ||
| PACKING | Assembled or Knock down Packing | |||||||||
- Whole house furniture customization
- home kitchen design items
- House kitchen projects
- hotel furniture design projects
- wardrobes design projects
- bathroom vanity design projects
- Color : Customized color
- size : Customized size
- Advantage : Easy clean, Durable, Trendy
- Material : Environment friendly E0/E1 Grade
- Door panel finish : 18mm MDF two pac. high gloss Lacquer
- Door panel finish : 18mm MDF two pac. high gloss Lacquer
- Back panel : 5mm MDF/16mm MFC
- Hinge&damper : Blum or DTC
No matter your order is just for your PERSONAL USE or PROJECT, We ‘ll TREAT every of you same as our VIP member, making it easy for you to choose your style, develop your design, review our construction details, select your satisfactory products, accessories, and provide quotation, more importantly, our after-sale services.
Thanks to the effort of our whole PRODECO GROUP TEAM and the support from our friends all over the world, PRODECO GROUP has been awarded with IS09001:2000 Quality Control Management Certificate from Swiss SGS group. Choose PRODECO, Buy good quality products with competitive prices as well as an EASY MIND.

