Kitchen Cabinet Specification & Options Library
Most kitchen projects do not fail on looks; they fail on written detail. This library gathers the options PRODECO lists for its own modular kitchens — door surfaces, carcasses, back panels, hardware and countertops — so a brief for custom kitchen cabinets can be issued in a single pass, and every custom kitchen cabinet design decision can be traced back to a listed option before production begins.
How to Use This Library
Two scopes run through the whole page, and every matrix below is read with the same three flags. Decide which scope you are buying in before you open the tables.
PRODECO modular scope
Built from the standard size table further down this page, so the combinations are already defined.
- Wall cabinets 350/720, base cabinets 600/700, tall cabinets 600/2250, island base 700
- 18mm MDF door panel, 18mm carcass with melamine finishing
- Blum or DTC hinges and drawer runners across the listed cabinet types
- The product page states modularity reduces lead time and improves site installation efficiency
Fully custom scope
Used when the room, the colour or the material mix falls outside the standard matrix.
-
- Customized colour and customized size, confirmed in writing before production
- Door materials HPL / HPDL, MDF, melamine board and plywood
- Surface treatments: acrylic, lacquer, PVC membrane and solid wood
- Environment friendly E0/E1 grade panel option
Door Panel & Finish Matrix
The door face is the one specification a client will judge every day, and it is also the easiest line item to leave vague. Every option below is named on the product page; the last column is what to settle before the doors are cut.
| Door / panel option | Listed as | Why specifiers shortlist it | Confirm before production |
|---|---|---|---|
| 18mm MDF two-pack high-gloss lacquer Listed |
Stated door panel finish of this island model | Reflective face for modern kitchens; the page states resistance to scratches and moisture that reduces maintenance cost | Panel thickness, edge detail and gloss level on a physical sample door |
| Acrylic Listed |
Door panel surface treatment list | Chosen where a flat, uniform reflective face is wanted across long door runs | Which listed door blank it is applied to, and the edge banding colour match |
| PVC membrane Listed |
Door panel surface treatment list | Specified for shaped or profiled fronts where a wrapped skin is preferred over a flat panel | Profile depth and edge wrap, approved on a sample door |
| HPL / HPDL Listed |
Door material list | Laminate-faced door for high-traffic fronts and for printed or solid-colour faces | Face thickness and whether the visible edge needs a matching strip |
| Melamine board Listed |
Both door material and the carcase material of this model | Practical for carcasses and for internal or cost-controlled fronts on the same order | Melamine finishing, and that door and carcass tones match under site light |
| Solid wood Listed |
Door panel surface treatment list | Chosen where grain and timber character lead the kitchen design | Species, grain direction and how movement is handled in the frame |
High-gloss lacquer front: the reflected light is the finish, so approve it on a sample before the run.
Door and carcass tones are ordered together — a tone mismatch is a site problem, not a factory problem.
Carcass & Box Build Matrix
Surfaces are what buyers photograph; the carcass is what they live with. Read this table layer by layer and each row ends with a decision you can settle in one email.
| Build layer | Options listed on the page | What it decides | Buyer check |
|---|---|---|---|
| Door panel | 18mm MDF Listed | Face thickness, door weight and how the hinge behaves over years of use | Confirm 18mm on the drawing and keep the hinge cup position matched to the panel |
| Carcass | 18mm melamine board (carcase material of this model); 18mm plywood, MFC or MDF with melamine finishing; particle board Option | Rigidity of the box, screw-holding at the joints, and how the interior reads when a door is open | State which carcass is priced for the modular run and which for the custom run — do not assume they match |
| Back panel | 5mm MDF or 16mm MFC Option | Rigidity of the finished unit and how the back of the box behaves in service areas | Decide per run and put it in the RFQ, not after production has started |
| Base support | ABS adjustable leg; kick toe in door-panel finish, aluminium, stainless steel or PVC Confirm | Levelling on an uneven floor and how the plinth line reads across the run | Confirm leg quantity per cabinet and kick toe material per zone of the kitchen |
| Panel grade | Environment friendly E0/E1 grade Confirm | The emission class you are specifying into the project | Confirm the grade per board type, since carcass and back panel can differ |
| Packing | Assembled or knock down Option | Shipping volume, site labour and breakage risk on the way to the room | Choose before the container plan is fixed, because it changes both cube and schedule |
Hardware & Fittings Request Schedule
This module is written to be copied. Tick each line you want quoted, and send it with your drawing so nothing is left to a verbal agreement.
| Copy into RFQ | Line item | Options listed | Where the page shows it |
|---|---|---|---|
| ☐ | Hinge & damper | Blum or DTC | Standard size table, all four cabinet types |
| ☐ | Drawer runner | Blum or DTC | Base, tall and island base cabinets |
| ☐ | Drawer slide | Listed accessory | Accessories list — confirm it matches the runner |
| ☐ | Drawer basket | Listed accessory | Accessories list — supply internal drawer widths |
| ☐ | Lazy Susan storage | Listed accessory | Accessories list — corner base units only |
| ☐ | Handle & knob | Listed accessory | Accessories list — send centres and finish |
| ☐ | Toe kick | Door-panel finish, aluminium, stainless steel, PVC | Standard size table — batch with the carcass order |
| ☐ | Backsplash | Listed accessory | Accessories list — confirm height |
| ☐ | Faucet | Listed accessory | Accessories list — confirm deck cut-outs |
| ☐ | Sink (optional) | Stainless steel, zinc alloy | Key features — settle before the countertop product format |
A hinge brand that is never written down is a hinge brand you cannot ask about later. Put the brand per cabinet type on the purchase order.
Countertop & Quartz Island Matrix
The countertop is the last specification that gets frozen and the first one that shows wear. The island in this model is described as using premium artificial quartz and other composites, and as enhancing functional workspace while withstanding heavy use.
| Countertop option | Listed as | Where it fits the plan | Edging you can pair |
|---|---|---|---|
| Artificial quartz Listed | Premium artificial quartz on the island top | Island and main worktops in a kitchen that is used hard every day | Beveled edge · Flat / eased edge · Full bullnose · Half bullnose · Laminated bullnose · Laminated half bullnose |
| Artificial granite or artificial marble Listed | Countertop material list | Where a stone look is required on a specification where weight matters less | |
| Marble Listed | Countertop material list | Statement islands and feature runs where the veining is part of the design | |
| Composite acrylic, pure acrylic or solid surface Listed | Countertop material list | Shaped, integrated or long runs where joint lines should disappear | |
| Resin and laminate Option | Countertop material list | Utility zones and volume-driven runs where the top is not the centrepiece |
Standard Size & Configuration Table
This is the modular matrix behind the whole library: four cabinet types, their listed sizes and the build each one ships with. Read it as the default you deviate from, not as a limit.
| Cabinet type | Sizes (mm) as listed | Door panel | Carcass | Back panel | Hinge | Drawer runner | Adjustable leg | Kick toe |
|---|---|---|---|---|---|---|---|---|
| Wall cabinet | 350, 720 | 18mm MDF | 18mm plywood, MFC, MDF, with melamine finishing | 5mm MDF / 16mm MFC | Blum / DTC | — | — | — |
| Base cabinet | 600, 700 | 18mm MDF | 18mm plywood, MFC, MDF, with melamine finishing | 5mm MDF / 16mm MFC | Blum / DTC | Blum / DTC | ABS ajustable leg | Same as door panel, aluminium, stainless steel, PVC |
| Tall cabinet | 600, 2250 | 18mm MDF | 18mm plywood, MFC, MDF, with melamine finishing | 5mm MDF / 16mm MFC | Blum / DTC | Blum / DTC | ABS ajustable leg | Same as door panel, aluminium, stainless steel, PVC |
| Island base cabinet | 700 | 18mm MDF | 18mm plywood, MFC, MDF, with melamine finishing | — | Blum / DTC | Blum / DTC | ABS ajustable leg | Same as door panel, aluminium, stainless steel, PVC |
Values are reproduced as printed in the product page table, including the sizes column where fewer than three values are shown. Customized size and customized colour are listed under the page’s custom services.
Scenario to Specification
Six typical briefs, each mapped to a listed configuration and the one decision that has to be made before the order is released.
Compact galley or apartment kitchen
Wall 350/720 with base 600, 18mm MDF doors, 18mm carcass, Blum or DTC hinges.
Decision: whether the standard matrix covers the run, or a non-standard height has to be quoted.
Family kitchen with heavy drawer use
Base 700 with Blum or DTC runners, plus drawer slide and drawer basket from the accessory list.
Decision: runner specification and internal drawer widths, given before the baskets are ordered.
Humid or coastal installation
18mm carcass, back panel in 5mm MDF or 16mm MFC, ABS adjustable legs, E0/E1 grade panels.
Decision: which back panel and grade the factory should price for boards in that room.
Open-plan island and entertaining zone
Island base cabinet 700 with a premium artificial quartz island top and a selected edge profile.
Decision: edge profile and overhang, frozen before the countertop product format is taken.
Whole-house or hotel project
Kitchens plus wardrobe and bathroom vanity scope, with knock-down packing for site assembly.
Decision: which rooms ship assembled and which ship knock down, before the container plan is set.
Wholesale or container order
Modular matrix, assembled or knock-down packing, lead time typically within 15 days per the page FAQ.
Decision: packing split across the order, and a written confirmation on door-to-door shipping.
Turn the Specification Into a Quotation
Send the completed matrix with your drawing and the factory can price against a fixed set of options instead of a description. PRODECO GROUP states it holds an ISO9001 quality management certificate issued through SGS.
What to include in your enquiry
- Scope: modular matrix run or fully custom run, per room
- Door material and surface treatment, with the door blank named
- Carcass and back panel choice, plus the E0/E1 grade per board
- Hardware list copied from the schedule, with brands per cabinet type
- Countertop material and edge profile, island dimensions included
- Colour reference, customized sizes, packing method and shipping preference
Related Products
Keep adjacent product options together for a faster catalog comparison.
Products – Full Range of Custom Cabinet Furniture
Browse our complete range of custom cabinet products including kitchen, wardrobe, vanity, and bench tops. ISO-certified manufacturer with global export capability.
Products – Full Range of Custom Cabinet Furniture
Browse our complete range of custom cabinet products including kitchen, wardrobe, vanity, and bench tops. ISO-certified manufacturer with global export capability.
Products – Full Range of Custom Cabinet Furniture
Browse our complete range of custom cabinet products including kitchen, wardrobe, vanity, and bench tops. ISO-certified manufacturer with global export capability.
Frequently Asked Questions
which door finishes can i specify?
the product page lists acrylic, lacquer, pvc membrane and solid wood as door panel surface treatments, applied to door materials that include hpl / hpdl, mdf, melamine board and plywood. this island model is shown with an 18mm mdf two-pack high-gloss lacquer door.
what carcass and back panel options are listed?
carcase material is listed as 18mm melamine board, with 18mm plywood, mfc, mdf and particle board also named, and the standard size table shows 18mm plywood, mfc or mdf with melamine finishing. the back panel is offered in 5mm mdf or 16mm mfc.
which hardware brands are listed?
hinges and dampers are listed as blum or dtc, and drawer runners are listed as blum or dtc for base, tall and island base cabinets. base units use an abs adjustable leg, and the accessory list covers backsplash, drawer basket, drawer slide, faucet, handle & knob, lazy susan storage and toe kick.
what standard cabinet sizes are listed?
the standard table lists 350 and 720 for wall cabinets, 600 and 700 for base cabinets, 600 and 2250 for tall cabinets, and 700 for the island base cabinet. sizes are printed in millimetres and can be customized outside this matrix.
can colours, sizes and materials be customized?
yes. the page lists customized colour, customized size and environment friendly e0/e1 grade material under custom services, so colour matching, non-standard dimensions and a specified panel grade can all be requested with your drawing.
what is the lead time and how are cabinets packed?
the page faq states wholesale kitchen cabinet orders typically ship within 15 days, with door-to-door shipping offered and cabinets packed either assembled or knock down. contact the team to discuss your project timeline and shipping preferences before the order is confirmed.